7*24小時工作時間隨時全心服務

0531-85919987

產品導航

Technology

您的當前位置:首頁 > Technology
Installation method of SH0308B Air release value tester
2020-09-09 14:12:51 admin 677

1. After unpacking the instrument, carefully remove the packaging and check whether the accessories are complete and without damage against the packing list of the instrument accessories.

If parts are incomplete or damaged, please contact us in time.

2. Place the glass tube with jacket on the test stand.

3. Connect the water inlet of the jacket glass tube with the water outlet of the host machine, and connect the water outlet of the jacket glass tube with the water return port of the host machine,

4. Connect the air outlet of the air compressor to the air outlet behind the main engine.

5. Connect the power plug of air compressor.

6. Connect the power supply of the host.

7. If no water is injected, connect the rear upper drain pipe to the sink to prevent overflow due to excessive water injection.