ST211A manual pharmacopoeia cone Penetration tester is based on the 2020 pharmacopoeia 0983 cone Penetration the determination of the technical requirements of the law of and the relevant provisions of the design and manufacturing, the main applicable is suitable for the soft cream, eye cream and commonly used matrix materials (such as vaseline, lanolin, wax) half solid material, in order to control the hardness and the properties such as viscosity, avoid affect drug coating and ductility.
Main technical features
1. Digital display is adopted to display the coning degree value, which is intuitive and eye-catching.
2, with the lifting frame coarse adjustment, fine adjustment function, easy to adjust, accurate needle.
3. Equipped with heating and cooling constant temperature bath, water bath temperature automatic control, cost-effective equipment.
Main technical parameters and indicators
|
Measurement range |
0 ~ 700 coning degree (digital display table shows 0 ~ 70mm); |
|
Coning timing control device |
The time can be set arbitrarily according to your own needs, and the time error is less than ±0.1 second; |
|
resolution |
0.01㎜; |
|
Needle insertion accuracy |
±1 degree of coning; |
|
Temperature measuring range |
10 ~ 50 degrees (equipped with semiconductor cooling cycle device, which can be heated or refrigerated); |
|
Temperature control accuracy |
25±0.1℃; |
|
Temperature control mode |
high-precision digital temperature controller, which can maintain a constant temperature up to 25 degrees as required by standards; |
|
Standard cone |
102.5±0.05g, in line with the pharmacopoeia of 2020; |
|
Lifting support |
Double lifting adjusting mechanism of coarse adjustment and fine adjustment makes it easy for the needle tip to align with the sample plane |
|
Others |
Equipped with cold light source, easy to use and operate. |
|
Standard cone |
1 # cone: the mass of 1 # cone is 102.5g ± 0.05g, and the mass of matching cone rod is 47.5g ± 0.05g; 2 # cone: the mass of the II # cone is 22.5g ± 0.025g, and the mass of the matching cone rod is 15g ± 0.025g (optional) 3 # cone: the total mass of III # cone and taper rod is 9.38g ± 0.025g (optional) |
|
Cone penetrometer: 280mm * 350mm * 480mm Constant temperature bath: 350mm * 320mm * 120mm |
|
Packing list
|
S/N |
Name |
Quantity |
Unit |
Remarks |
|
1 |
Host |
1 |
set |
|
|
2 |
No. 1 cone |
1 |
piece |
|
|
3 |
Sample box 1 |
1 |
piece |
|
|
4 |
Heating and cooling thermostatic bath |
1 |
set |
|
|
5 |
Power cord |
1 |
piece |
|
|
6 |
Certificate warranty card |
1 |
copy |
|
|
7 |
instructions |
1 |
copy |
|
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the research and production of experimental testing instruments and industrial testing instruments. It is a professional instrument company integrating instrument research and development, manufacturing, sales and service. Its products are widely used in food, flour, grain and oil, Feed, electricity, petrochemical, industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the "first-class service, customer first" as the purpose, "reasonable price, honesty and trustworthiness" as the business policy. Adhere to technical innovation, with rich knowledge of the technical team and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive enterprises in the industry, with the strength of technology research and development, professional technical knowledge and innovative design concept, in the model improvement, Significant technical breakthrough has been achieved in the development of function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product after-sales service commitment: warranty period of one year, long-term technical support outside the warranty period. During the warranty period, the seller shall bear the cost of the replacement of the equipment, the freight and maintenance of the instrument; outside the warranty period, the seller shall waive the maintenance fee and charge only the cost of the basic materials and freight charges when the instrument is malfunctioning and the seller shall not charge the maintenance fee during the warranty period.
